Sewing In The Barn | How-To's

Brother 1034d Serger and compatible models:

Adjust Presser Foot Pressure
page divider

 

First: Get a Sharpie or other Permanent marker, or colored nail polish.

Before adjusting the tension from your usual setting,
make a “match up mark” both the Silver KNOB at the top of the serger
on the left side in line with the presser foot bar and the actual top of the serger  with a line or a dot on both - so you can get the setting back to where it was originally.

 

Turning to the Right = Tightens pressure
Turning to the Left = Loosens pressure
Only a slight turn of the knob can make a significant adjustment
This is why marking both the knob and the top of the serger is really important.

 

From page 45 of the Manual

 

Brother 1034d Serger presser foot pressure adjustment image

Serger Timing - fix upper looper noise (slipping drive belt)
 
Serger Troubleshooting from Burly Sew

 

If you'd like to receive an email notification when this page

changes,you can subscribe to the 100% opt-in, free service

provided by ChangeDetect.com ~ they do not send unwanted email.

Copyright © 2018 SewingInTheBarn.com ~ Santa Clara California

All Rights Reserved

page divider